freebus.org

Hi all,

I would like to try do this :

A KNX power consumption ...


Web page http://www.zennio.com/produits/knx-compteur-energie/kes


I have already buy an AC current sensor like this (for my personal developments with Arduino)
http://www.seeedstudio.com/depot/noninv ... p-547.html

(There are 2 versions 30 and 100 Amp)


There are many examples with Atmega/Arduino breadboard and code etc ...

More information :
http://technik-fan.de/index.php/Open_Energy_Monitor
http://openenergymonitor.org/emon/node/156
http://jarv.org/2009/07/home-power-monitoring


What's you think about this project on LPC ? Give me your feedback
I would like begin this project, and if i can receive much help, ping me

Bye

Hi,

I think the LPC may not be the best Platform to build on. There is only one LPC in DIL technique: 8 bit ADC. According to your choosen 30 A current transformer, this resolution would be too coarse, I think. All other LPCs with embedded ADC are SMD components.
If you go and choose SMDs, some other MCUs come to mind, like the Microchip PIC18F86J72 16/24 ADC or (if you like the C51) various ADUC units from Analog Devices.

The other possibility is to use a mikrocontroller and a separate ADC (but I would think all high resolution ADCs are SMD).

I would like to measure voltage and current at the same time, to be able to calculate energy and cos(phi). That would be interesting.

regards,
Sebastian

Thanks sebastian...

Yes Oldi speak a little with me about this project and give me also the same information...
With an ADC controller

Or P89LPC933/934/935/936 have an 8-bit ADCs , why not...

For the moment, i search more informations ...

Bye

Hallo,
ich bin mal so frei und antworte in deutsch

Ich habe mal herumgestöbert und diesen Beitrag gesichtet:

http://www.mikrocontroller.net/topic/218074

Wenn man mal von den bekannten Anfeindungen dort absieht, entdeckt man dass
in dem Reichelt Enegry checker(http://www.reichelt.de/?ARTICLE=88135) dieser chip http://www.cirrus.com/en/products/cs5460a.html
oder dessen Nachvolger verbaut ist.

Diese IC's stellen meist ein pulse zu Verfügung den wir mit dem freebus Universalzähler ausweten könnten.

_________________
LG
Andreas

If you need an ADC you can even use the AVR controller.
There is everything in hardware on the microcontroller available.

_________________
Gruß
Matthias