| freebus.org http://freebus.org/phpBB3/ |
|
| PWM frequenz bei out8 http://freebus.org/phpBB3/viewtopic.php?f=8&t=2121 |
Seite 1 von 1 |
| Autor: | diydiydi [ 8. Juni 2013 01:46 ] |
| Betreff des Beitrags: | PWM frequenz bei out8 |
Hallo, folgend ist meine Such nach Google: http://relays.te.com/appnotes/app_pdfs/ ... n_note.pdf Zitat: Frequency: As could be seen in figure 3 the higher the frequency the lower is the ripple current. Therefore the effective coil voltage could be chosen to be lower with keeping all the other parameters constant. We recommend a PWM frequency of minimum 20kHz. Zitat: The application of PWM voltage across the relay coil causes magnetostriction of the iron within the relay magnetic system (core/frame/armature). The result is a slight audible noise if the relay was freely suspended. However when the relay soldered or welded onto a rigid lead frame that noise might be amplified. This depends on the lead frame (suspension, dimension, etc.) and the sound propagation and damping within the car. Choosing 20kHz PWM avoids disturbing noises for human beings but might cause problems to animals. mfg |
|
| Autor: | oldcoolman [ 10. Juni 2013 14:05 ] |
| Betreff des Beitrags: | Re: PWM frequenz bei out8 |
Hallo. Du brauchst nichts erklären. Beim LPC ist die PWM Frequenz oscilator/2/256. fix. Man kann nur den Duty einstellen. |
|
| Autor: | diydiydi [ 26. Juni 2013 15:23 ] |
| Betreff des Beitrags: | Re: PWM frequenz bei out8 |
oldcoolman hat geschrieben: Hallo. Du brauchst nichts erklären. Beim LPC ist die PWM Frequenz oscilator/2/256. fix. Man kann nur den Duty einstellen. Ja, du hast Recht. the Max.-Frequenz ist nur 14.4kHz, aber wieso macht man nicht mit den extra-Componets wie 555, um die Frequenz zu erweitern? Dann wir können die Noise sich vermeiden. mfg |
|
| Seite 1 von 1 | Alle Zeiten sind UTC + 2 Stunden |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|